Material: Compost manure and plant waste
Application: Organic fertilizer production
The tooth stirring granulator is designed and manufactured by the new wet continuous push rod granulation process. This machine can not only granulate a variety of organic substances, but especially the crude fiber materials that are difficult to be granulated by conventional equipment, such as: crop straw, wine dregs, fungus dregs, medicinal dregs, animal dung, etc. The granulation effect of raw materials such as humic acid and municipal sludge has also achieved good results.
The wet tooth granulator uses the mechanical stirring force of high-speed rotation and the resulting aerodynamic force to continuously realize the processes of mixing, granulation, spheroidization, and densification of fine powder materials in the machine, so as to achieve the best granulation. Purpose.
The tooth stirring granulator consists of a body part, a granulating rotor part and a transmission part.
1. The structure of the stirring tooth granulator is novel and reasonable, the weight is reduced, and the height is reduced.
2. The inclination of the large plate can be adjusted. The use of angle shims is flexible and convenient to adjust.
3. The unique combination of unpowered scrapers is used to reduce auxiliary power consumption. 4. The large plate is composed of a plate body and a plate segment. Reduce main motor power. The disc section can be adjusted up and down along the disc body. The end of the disc section is a side flange, which can ensure that the material ball will not be pulled or torn when the material ball is discharged from the disk.
5. The brand-new dredging design uses the unpowered combined scraper to clean the edge and bottom, and the corner scraper to clean the corner. With the unique processing technology of the plate, the dredging effect is good, and there will be no large mud masses. The diameter of the material ball is 90% 3-5mm.
The working principle of the stirring tooth granulator is that the material enters the machine from the feeding port at one end of the body, and is continuously pushed by the granulating rotor and mechanically moves with the casing to achieve the purpose of granulation. The finished granules are pushed out at the other end of the body. off the plane. The rotor is driven by the motor and reducer of the transmission part, and the transmission part and the body part are mostly fixed on the same frame.
|Model||Installation Angle (°)||Capacity (t/h)||Total Power (kw)||Moisture of Feeding Material||Size of Feeding Material (mesh)||Dimensions (mm)|
Overseas marketing outsourcing services for small and medium-sized enterprises.