Fertilizer Coating Machine

The complete set of rotary coating machine is composed of a screw conveyor, a stirring tank, an oil pump, a main engine, etc. to form a powder or liquid coating process. It can effectively prevent the agglomeration of compound fertilizers. The main unit is lined with polypropylene or acid-resistant stainless steel. This equipment is specially designed on the internal structure according to the process requirements, and it is an effective special equipment for compound fertilizer.

The working principle of the rotary coating machine:

The belt and pulley are driven by the main motor, and are transmitted to the driving shaft through the reducer. The material is added from the feed end and passes through the inside of the cylinder. Mix with powder (liquid) and flow out from the discharge port.

The composition of the rotary coating machine:

1. Bracket part: The entire rotating part of the body is supported by the bracket, and the force is large. Therefore, the supporting parts of the machine are all welded with medium carbon steel plates and channel steel, and have passed strict quality control and special process requirements, and have achieved the purpose of this machine. In addition to this, the more important thing is the supporting roller fixed on the shelf. Considering that it will have greater friction with the rolling belt of the body, our factory specially selects high-quality anti-corrosion and wear-resistant materials, which greatly improves the service life of the machine. The frame also adopts casting integrated technology. In addition, there are hoisting hooks at the four corners of the supporting wheel frame, which is convenient for loading, unloading and transportation.

2. Transmission part: The transmission part of the whole granulator is particularly important, and the work of the whole machine is based on this. The transmission frame is welded with high-quality channel steel and has passed strict quality requirements. The main motor and reducer installed on the transmission frame are ISO products with reliable performance and reliable quality. The motor drives the pulley, the V-belt and the reducer to transmit to the main shaft to make the body work. The transmission reducer and the working part of the main shaft are driven by a nylon pin coupling.

3. Large ring gear: It is fixed on the machine body and meshes with the transmission pinion to drive the machine body to work in the opposite direction. It adopts high-tech wear-resistant materials to make the machine last longer.

4. Rolling belt: fixed on both sides of the body to support the whole body.

5. Body part: The most important part of the whole coating machine is the body part, which is welded with high-quality medium carbon steel plate, and is used for the purpose of this machine through strict quality control and specific process requirements.